Go back to Detail Folder

·         PAN
By default WHIP! is in Pan mode and the mouse pointer is a hand icon. To pan, press and hold the left mouse button and drag. The hand grabs the screen as you pan the DWF. Alternatively, you can use the arrow keys as keyboard shortcuts for pan.

·         ZOOM
If you choose Zoom, the pointer changes to a magnifying glass. To zoom, press and hold the left mouse button and drag up and down in the window to zoom in and out, respectively. Alternatively, you can use the Pg Up and Pg Dn keys as keyboard shortcuts for zooming in and out.

·         ZOOM RECTANGLE
If you right click and choose Zoom Rectangle, the pointer changes to a cross. To Zoom Rectangle, press and hold the left mouse button, then drag a rectangle over the area you want to zoom. When you release the button, the view zooms to the selected area. You must zoom to an area of at least 5 pixels.

·         FIT TO WINDOW
If you right click and choose Fit to Window, the view is zoomed in or out so that the drawing fills the available WHIP! window. Alternatively, you can use the Home key as a keyboard shortcut for Fit to Window.

·         LAYERS
Using WHIP!, if you right click and choose Layers, the Layers dialog opens from which you can turn layers on and off. The Layers dialog works like most Explorer dialog boxes in that you can select one or more layers and click the light bulb icon to turn on or off all of the selected layers. Layers are toggled based on the state of the light bulb icon when you click it. Pressing the space bar is the same as clicking the light bulb icon.
From within the Layers dialog, right click to access the Layers submenu. Layers submenu commands are On, Off, Toggle, Select All, and Clear All.

·         NAMED VIEWS
Some DWG files have named views for use with AutoCAD. When a DWF is generated from such a DWG file, the named views are maintained within the DWF. As a result, when viewing a DWF file you can right click and choose Named Views to open the Named Views dialog. From the Named Views dialog you can select in the DWF file a named view previously defined in the source DWG. To position your browser to a view, double-click the named view, or select a named view and then click OK to select that view and dismiss the dialog. The right click menu Named Views command is available only when a DWF file contains at least one named view.

·         LOCATION
If you right click and choose Location, the Current Location dialog opens displaying the current location of the mouse with respect to the DWF file. The coordinates displayed in the dialog reflect the original DWG file coordinates, not the coordinates of the DWF file.

·         FULL VIEW
When you right click and choose Full View, the browser navigates to an URL that contains only the DWF file. The DWF fills the available browser window. To undo this operation, use the browser's Back button or Go menu Back command.

·         HIGHLIGHT URLs
Right click, then check or clear the Highlight URLs menu command. If the command is checked, WHIP! identifies all of the URLs in the DWF by highlighting each URL region. This enables you to see where URLs are before navigating. To avoid matching the color of the background or geometry in the DWF file, the highlighting is drawn in alternating light-gray/dark-gray/clear colors. Rendering in the clear color provides an instance where you can see the geometry underneath the URL text box.
If the command is not checked, URLs are not highlighted.
As a shortcut for the right click menu command, hold down the shift key. Release the Shift key to turn off Highlight URLs.
The right click menu Highlight URLs command is available only when a DWF file contains at least one URL.

·         COPY
To copy the current view of the DWF file, choose Copy from the right-click menu, or press CTRL+C. The current view is copied as an Enhanced Windows Metafile (EMF) and placed in the Windows Clipboard. You can paste the Clipboard contents into any EMF compliant application by choosing that application's Paste command, or in most cases by pressing CTRL+V. Note that images copied and pasted from WHIP! into other applications may lose some precision since EMF format files do not have the same amount of detail as DWF files.
Note that the Copy command shortcut (CTRL+C) does not work in Netscape Navigator. Netscape Navigator users must use the right-click menu Copy command to copy the current WHIP! view.

·         PRINT
To print a DWF, right click and choose Print. The view that is currently visible in the WHIP! window is printed using the standard system print controls. Using the right click menu Print command prints only the DWF file. Otherwise, to print the entire HTML page including the current view of the DWF in the WHIP! window, use the browser's Print button or File menu Print command. If you print using the browser Print command, the Print dialog appears from which you have the option to force the background color of the DWF to white and the color of the geometry to black. (These settings are on by default.)

·         SAVE AS
To save the DWF to your local drive, right click and choose Save As. You can choose to save the DWF file in three formats: DWF, DWG, or Windows Bitmap (BMP).
If you select to save the file as a DWG, WHIP! copies the DWG file used to generate the DWF, provided that the DWG file is available. When looking for a DWG file, WHIP! looks in the directory where the DWF file is stored. Note that the DWF file and DWG file must reside in the same directory for drag and drop to work.
If you do not want to publish the DWG file, but want to publish only the DWF, do not place the DWG file in the DWF directory. In this case, when you attempt to save as DWG, an error message is generated that indicates that the DWG file is not available and the Save As fails.
The right click menu Save As command is available once the streaming of the DWF file completes.

·         ABOUT WHIP!
When you right click and choose About WHIP!..., the About WHIP! dialog opens. The About WHIP! dialog displays information about WHIP! and the current DWF. Regarding the DWF, you can view information on the following attributes (assuming they were supplied when the file was created): data version (revision of DWF), description, author, creator, copyright, keywords, source filename, creation time, modification time, source creation time, source modification time, current view left, current view right, current view bottom, and current view top.
The coordinates depicted in the current view are useful when used with view="left+right+bottom+top" targets.

·         FORWARD
Forward is equivalent to the browser Forward button. The right click menu Forward command is useful when working with frames. Use it so that the browser only advances forward for the frame containing the DWF file.

·         BACK
Back is equivalent to the browser Back button. The WHIP! Back menu item is useful when working with frames. Use it so that the browser only advances backward for the frame containing the DWF file.

Viewing Hyperlinks in WHIP! :

In WHIP!, if the pointer is positioned over a hyperlink (an URL), the pointer changes to a pointing hand icon and the browser Status bar displays the address (URL) of the hyperlink. To navigate to an URL, click the link. Your browser displays the linked page.

If the object or area under the pointer contains more than one URL, the Status bar displays the message Multiple URLs. To display a list of URLs attached to the current object or area, click once. A list is displayed from which you can choose an URL.

Note that URL descriptions displayed depend on how the URLs are attached to the DWF. In general, URLs are displayed as raw URLs, for example http://www.autodesk.com. However, in some cases an URL may contain a descriptive name, for example The Autodesk Home Page. If a descriptive name was attached with the URL when the URL was added to the DWF, the descriptive name is displayed in the list of multiple URLs rather than the raw URL.

Using WHIP! with Microsoft Internet Explorer :

·         Due to a bug in Microsoft Internet Explorer 4.0x, when viewing a DWF file in "full screen" mode (when the DWF file is not embedded in an HTML page), selecting "Print..." from the File menu, or clicking the browser's Print toolbar button produces a blank page. To avoid this problem, use the "Print..." option from the WHIP! right-click menu. In addition, printing an HTML page with more than one DWF file embedded does not work successfully.

·         The Microsoft Internet Explorer keeps a copy of WHIP! in its "downloaded programs" directory. When upgrading from Internet Explorer 4.0x to Internet Explorer 5.0, WHIP! can become damaged. If this happens, follow these steps:

1. Shut down Internet Explorer and Netscape Navigator and any other application that is using WHIP!.
2. Uninstall WHIP! through the normal means.
3. Start up the operating system's File Explorer.
4. Go to the directory c:\windows\downloaded program files.
5. In this directory, look for either Autodesk WHIP! or "damaged control."
6. DO NOT DELETE THIS. Instead, right mouse click on the damaged control or Autodesk WHIP! and select Remove.
7. Reboot and reinstall WHIP! using the normal means.

Viewing DWF Files with WHIP!:

·         WHIP! runs on Windows95, Windows98, and Windows NT. There are no plans to port to Windows 3.11, Macintosh, nor Unix. A WHIP! DWF File Toolkit is available for third parties who wish to port WHIP! to other browsers or platforms. For example, a Java-based viewer is available at http://www.cadviewer.com.

·         WHIP! does not yet allow DDE printing of a DWF file from the operating system's right mouse button menu.

·         The DWG file must be in the same directory as the DWF file for the drag and drop feature to function. In a future release of Volo View Express (WHIP!'s successor), this restriction may be lifted when the "DWGdirectory" and "DWFdirectory" URL options are implemented.

Go back to Detail Folder